Oxygen sensor for Maxtec CAG250, MAX-250
Click To Enlarge
Sensor Specifications & Compatibility    
Catalog Number E61810  
Output Signal in Air 10mV 15.5mV   
Response Time T 90% < 15 seconds  
Nominal Sensor Lifetime 900 000 % volume Oxygen hours  
Electrical Interface Cable and jack connector  
Compatibility: Maxtec OM-25A MAX250 (MAX-250)  
  Teledyne R29  
  PT250  
  10-103-11  
  CAG25 CAG-250I  
Notes: Internal Type sensor, see E61800 for External Sensor.  
 
Medical Oxygen Sensors (Fuel Cells) general specifications:  
Measurement Range: 0-100 % oxygen  
Accuracy and Repeatability: < 1 % vol. O2when calibrated at 100 % O2  
Zero Ofset: < 0.5 % vol. O2in 100% N2, applied 5 minutes  
Linearity Error: < 3 % relative  
Cross Interference: < 0.5 % vol. O2response to:  
  10 % CO2balance N2  
  80% N2O balance N2  
  7.5% Halothane balance N2  
  7.5 % Isofurane balance N2  
  7.5 % Enfurane balance N2  
  9% Sevofurane balance N2  
  20% Desfurane balance N2  
Infuence of Humidity: - 0.03 % rel. per % RH at 25ðC  
Infuence of Pressure: proportional to change in oxygen partial  
  pressure  
Infuence of Mechanical Shock: < 1% relative after a fall from 1m  
Operating Temperature: 0 to 50ðC  
Temperature Compensation: built-in NTC compensation (see below)  
Efect of Temperature between +5 ðC and +25 ðC: 3 % relative error  
Compensation (steady state): between 0 ðC and +50 ðC: 8 % relative error  
Operating Humidity: 0-99 % RH non-condensing  
Long Term Output Drift: < 1 % vol oxygen per month  
  typically < - 15 % relative over lifetime  
Storage Temperature: -20 to +50 ðC  
Recommended Storage: +5 to +15 ðC  
Recommended Load: 10 kOhms  
Warm-Up Time: < 30 minutes, after replacement of sensor  
Weight: approximately 28 grams  
  approximately 43 grams E61912 series  
Designed and manufactured according to EN ISO 9001 : 2000 and EN13485 : 2003  
specifications are applicable at standard conditions: 1013 hPa, 25ðC dry ambient air

 

 

Oxygen sensor for Maxtec CAG250, MAX-250

  • Item #: B226-212
  • Manufacturer: WestPrime Healthcare
  • Manufacturer's Product Number: PT-250 / E61810
  • Condition: New

Oxygen sensor for Maxtec CAG250, MAX-250

Price: $145.00
Availability: CALL FOR MORE INFO
Reviews (0) Write a Review
No Reviews. Write a Review